Tascam TrackPack 4×4

The  TASCAM TRACKPACK 4×4 includes a US-4×4 interface, mics, headphones, and DAW software – everything musicians need to make great-sounding studio recordings of acoustic instruments.

The US-4×4 is a 4-in/4-out USB interface with four Ultra-HDDA mic preamps. These preamps provide up to 57dB of gain and the best noise and distortion specs in their class. The audio design features high-performance, musical components like NE5532 op amps for rich sound quality without coloring the source. In addition to the four balanced line outputs, two headphone outputs are provided for monitoring while recording talent.

A pair of great-sounding TM-80 condenser microphones is also included. These cardioid mics include shockmounts, tabletop mic stands, and XLR cables to help you start recording right away. The mic pair is perfect for acoustic sources like acoustic guitar, drums, or recording a singer while performing with an instrument.

To assist you while recording, two sets of TH-02 headphones are included. Use the US-4×4’s two headphone outs to monitor a performer while they play along with the track. The full-range, closed-back studio headphones are perfect for recording without bleed as well as perfecting your mix.

Also included with the interface are your choices of two DAW applications. Both Steinberg Cubase LE and Cakewalk SONAR LE are included, as well as gigabytes of loops, instruments, and effect plug-ins to start a production studio.

For anyone looking to jump start their studio environment, the TASCAM TRACKPACK 4×4 is like a studio in a box.

Additional Images

Product Specs

US4X4
  • Mic/line inputs with up to 57dB of gain
  • 4-in/4-out USB 2.0 interface with up to 24-bit/96kHz resolution
  • XLR/1/4″ combination input jacks
  • Zero-latency Direct Monitoring
  • NE5532 op amps
  • USB Audio Compliant 2.0 drivers for iOS compatibility
  • Independent line out and headphone level controls
  • 2 headphone output jacks with 45mW per channel amplifiers
  • MIDI Input and Output
  • Aluminum body with angled design for better desktop visibility
  • Includes power adapter
  • Includes SONAR X3 LE and Ableton Live Lite 9 downloads
TH-02
  • Design: Closed-back dynamic
  • Frequency response: 18Hz – 22,000Hz
  • Driver diameter: 50mm
  • Sensitivity: 98dB (+/-3dB)
  • Input impedance: 32ohms
  • Max input power: 600mW
  • Cable: 9.8ft (3m) when fully extended
  • Plug: 3.5mm(1/8″) stereo mini plug, 6.3mm(1/4″) stereo phone plug adapter
  • Dimensions: 180 (W) × 240 (H) × 90 (D) mm
  • Weight: 298g (With cable)
TM-80
  • Transducer type: Condenser
  • Polar pattern: Cardioid
  • Frequency response: 20 – 20,000 Hz
  • Output impedance: 200ohm +/-30% (at 1kHz)
  • Load impedance: >1k ohm
  • Sensitivity: -38dB +/-2dB (0dB=1V/Pa at 1kHz)
  • Max SPL: 136dB (at 1kHz=1% THD)
  • S/N ratio: 77 dB
  • Connector: 3-pin XLR male
  • Power supply: 9 to 48V phantom power
  • Dimensions: 48(W) × 165 (H) × 48 (D) mm
  • Weight: 300g
  • Includes: shock mount, mini desk stand, mic cable (1.8m XLRM – XLRF)