iRig Pro I/O

The ultra-compact professional audio/MIDI interface for all your gear. Now record with any of your gear on the go, and monitor in real time with any compatible device. That’s iRig Pro I/O, the ultra-compact professional quality audio and MIDI in/out for your mobile recording life. iRig Pro I/O is the next generation of the iRig Pro — the first mobile interface for connecting all of your studio gear to your iPhone, iPad, Mac, PC or Android device to play and record on the go.

iRig Pro I/O is a pocket-sized full-featured audio and MIDI interface that gives you 24-bit/96kHz recording studio quality sound everywhere you go with a few additional essential features for mobile recording. First, iRig Pro I/O is designed to be “plug and play” easy to use with all of your gear — studio mics, vocal performance mics, guitars, basses, keyboards — whatever it is, iRig Pro I/O can handle it.

Product Features

Package includes
  • iRig Pro I/O universal Audio-MIDI interface
  • Lightning to Mini-DIN connection cable (60cm/23.62″)
  • USB to Mini-DIN connection cable (60cm/23.62″)
  • 2 x 2.5mm jack to MIDI cable (160cm/63″)
  • 2 x 1.5V AA Battery
  • Velcro strip

Additional Images

Stock Code IP-IRIG-PROIO-IN
Dimensions H 37mm x W 43mm x D 127mm
Weight 120gm

Owner’s Manual

Product Specs

Microphone Input

  • Microphone Input: balanced female 3-pin, XLR. Pin 2: hot / Pin 3: cold / Pin 1: ground
  • Microphone Input Level: from 6 mVpp to 1.4 Vpp
  • Microphone Input Impedance: 1.6 kOhms
  • Gain Range: 40 dB
  • Phantom Power: +48V ± 4V
  • Frequency Response: 20 Hz – 20 kHz +/-1.5dB
  • Input Noise: -103 dB(A), -97 dB RMS

Instrument Input

  • Instrument Input: unbalanced, Hi-Z, TS 1/4″ Jack, Tip: signal / Shield: ground
  • Instrument Input Level: from 30 mVpp to 6.9 Vpp
  • Instrument Input Impedance: 1 MOhms
  • Gain Range: 27 dB
  • Frequency Response: 20 Hz – 20 kHz +/-1.5dB
  • Input Noise: -103 dB(A), -97 dB RMS

Stereo Headphone Output

  • Connector: 1/8″ TRS Jack. Tip: right / Ring: left / Shield: ground
  • Headphone Level Control numbered thumbwheel
  • Headphone Level Power 100mW into 50 Ohms

MIDI Input/Output

  • Connector: 2×2.5mm TS Jack

Other Input/Output

  • DC barrel: 1x DC barrel. For power and device charging.
  • Device Connector: mini-DIN

Common

  • Conversion: 24-bit A/D, 24-bit D/A
  • Sampling Rate: 44.1 kHz, 48 kHz, 88.2 kHz and 96 kHz

Power

  • USB bus powered when used with a computer
  • Battery powered (2xAA included) when used with an iOS device