DigiTech CabDryVR Dual Cabinet Simulator

The new DigiTech CabDryVR Dual Cabinet Simulator pedal features a selection of 14 all new great sounding guitar and bass cabinet impulse responses. Now you can run direct from your pedal board or preamp through the CabDryVR to your mixing board, in-ear monitors or DAW and get high quality cabinet emulation without the need for a real cabinet.

The CabDryVR features dual inputs and outputs, one of which has an optional dry path that can run to your on stage amp input. The CabDryVR Cabinet Tuning™ Size control was developed for the venerated GNX Series and morphs the resonant peak of the cabinet to create custom cab sizes and tones. Individual output level controls let you balance each cabinet’s volume in the mix.

The CabDryVR uses a 9VDC power supply to easily integrate into your existing pedalboard.

Note that the CabDryVR is a cabinet and speaker simulator, it does not emulate an amplifier.  Some adjustments may be necessary to your gain structure and boost usage when using the CabDryVR.  Also for a more “cab in a room” sound, try runnning a reverb like the DigiTech Polara after the CabDryVR, for more routing and usage suggestions see the online manual below.

Product Features

  • Studio Quality Guitar and Bass Cabinet Impulse Responses in a Pedal
  • 7 Guitar and 7 Bass Cabinets that can be mixed and tuned (14 cabinets total)
  • Dual Inputs and Outputs with separate cabinets on each
  • Cabinet B features an analog dry output for connecting directly to an amp input or amp FX Return
  • Output Clip indicator LED
  • Mono In/Dual Cabinet Out
  • Compact Size with Soft Click Vacuum-Style Footswitch
  • True Bypass circuitry preserves your tone when the pedal is not in use
  • High-Voltage operation for uncompromised signal quality
  • StompLock™ – This unique new device fits snugly over the control knobs to protect your finely-tuned settings from drops, bumps and kicks that inevitably take place when you perform.
  • Die cut Hook-and-loop Pedalboard Pad – This is a high-density mounting pad for stick and stay, semi-permanent mounting of the CabDryVR on pedalboards. It is also easily unmounted for pedalboard reconfiguration.

Guitar Cabinets

  • Cab 1 – Vintage American 2×12″
  • Cab 2 – Vintage British 2×12″
  • Cab 3 – British Green Slant 4×12″
  • Cab 4 – British Straight 4×12″
  • Cab 5 – Heavy American 4×12″
  • Cab 6 – Smooth Custom 4×12″
  • Cab 7 – Small Combo 1×8″

Bass Cabinets

  • Cab 1 – Flexy 1×15″
  • Cab 2 – Basic 1×15″
  • Cab 3 – Big Blue  1×18″
  • Cab 4 – AmeriTweed 4×10″
  • Cab 5 – Gold Diamond 4×10″
  • Cab 6 – Vintage Fridge 8×10″
  • Cab 7 – Blonde Basement 2×12″

Additional Images

Product Specs

  • Input: Separate Cab A and Cab B ¼” Unbalanced (Tip-Sleeve)
  • Input Impedance: Effect on: >1 MΩ (stereo), >500 kΩ (mono); Effect off: True hardwire bypass
  • Output: Separate Cab A and Cab B ¼” Unbalanced (Tip-Sleeve)
  • Output Impedance: Effect on: 1 kΩ; Effect off: True hardwire bypass
  • Controls: Cabinet A Type, Size, Level, Cabinet B Type, Size, Level, Effect On/Off
  • Switches: Soft Click, Vacuum Style Footswitch; Guitar/Bass Toggle Switch
  • Power Requirements: 9 VDC external power supply (required)
  • Power Consumption: 675 mW (< 75 mA @ 9 VDC)
  • Current Draw: 75 mA (typical at 9 VDC)
  • Power Supply Model: PS0913DC-04
  • Power Supply Output: 9 VDC 1.3 A
  • Dimensions: 11.18cm (L) x 6.73cm (W) x 5.08cm (H)
  • Weight: 0.453 kg